Products

technical pump seals
Stationary Ring(Carbon/SiC/TC)
Rotary Ring(SiC/TC/Carbon)
Secondary Seal(VITON/PTFE+VITON)

industrial mechanical pump seals
Secondary Seal(VITON/PTFE+VITON)
Spring & Other Parts(SUS304/SUS316)

The gasket uses expanded graphite tape as the filler material which provides superb sealability even under severe conditions such us high temperature.

The gasket can be applied for corrosive fluids, pure oxygen gas and vacuum lines.

Description
Pure Expanded PTFE Joint Sealant Tape with Adhesive back is an unique cord form gasket for use as a jointing on all types of flanges an

A company serving consumers through the development of quality products, gasket, gaskets, spiral wound gasket, heat exchanger gasket, metal jacked gas

Description
The products take asbestos,rubber as backbone and with pressure of heat.As the sealing material

Mainly made of NBR, polyacrylate rubber, silicon rubber, EPDM rubber, CR, NR or CPE through formulation-optimizing, mixing, sheeting, forming, and vul

Made through molding of flexible graphite materials and various braided packings.
Applications: Packing sealing for valves, pumps and reaction vesse

The packing is made of remie fiber impregnated with PTFE plus lubricant. As ramie turns soft and fibre expands after being placed in sea water, the pa

Pre-ompregnated, twisted cotton yarn, intensively reimpregnated during braided, An economical packing for stated limits of application.
The colorle

The packing is made of white asbestos fiber cords impregnated with PTFE dispersion.(Addtition of lubricant is operational.).

It can be processed into a wide range of heat insulation materion materials with quite high tensile strengh and toughness.

Made from quality PTFE resin, powdered graphite, Mos2, high temperature resistant lubricant and glass fiber through press shaping and sintering

Expanded Graphite Sheet & Roll are selected from the high purity natural flake graphite.They are made through the advanced chemical treatment and mech

High-quality combination of PTFE with incorporated graphite and rein-forced edges from aramid yarn to prevent gap extrusions within the high pressure