Single Spring mechanical seals

Mechanical seals Description
Working Conditions:
Mediums:Water,oil, and weakly-corrosive mediums,etc.
Temperature:-20oC~150oC
Pressure: ≤0.8Mpa
Speed: ≤ 10 m/S

APPLICATION

Mmechanical seals are used in pumps, blowers, agitators, compressors, and other rotary shaft equipment.

FAQ On Placing An Order                            

1. Quantity:   MOQ: 5 Sets on one order, do not required same size.

2. Delivery:All of them in stock, will be shipped out same day as we received your funds.Tracking Number will be provided.(All delivered by DHL, FEDEX, UPS AND TNT ETC).

3. Payment Method:   We accept T/T;Paypal; Credit Card; Escrow; Western Union; Money Booker; Money Gram or Your Advice.

4. Price:All prices listed above, manufactuer directed price, no middle profit. Please do try one time.

We are professional various kinds of mechanical seals. such as Pump seal, Industrial pump seals, Auto Cooling pump seals, Silicon Carbide Seal Ring, Tungsten Carbide Seal Ring, Alumina Ceramic Seal Ring, O Ring, packing and gasket, etc. Manufacturer and factory in China. We can produce various kinds of mechanical seals. such as Pump seal, Industrial pump seals, Auto Cooling pump seals, Silicon Carbide Seal Ring, Tungsten Carbide Seal Ring, Alumina Ceramic Seal Ring, O Ring, packing and gasket, etc if wanted, please contact us right now!

Seal failure reason analysis-- overheating
Because the sealing surface will produce heat use temperature should be lower than design specification rubber ring.The use of fluorine rubber and teflon temperature is 216 ℃, the use of nitrile butadiene rubber temperature is 162 ℃, although they are able to withstand higher temperatures, but because of the sealing surface heat is higher, so the rubber ring is in danger of continue to sulfide, eventually lose elasticity and leakage.(cold area consider cold short)
Also caused by thermal medium crystal surface, such as carbon, caused by sticking and sealing surface by condensation sliding parts.And some of the polymer in overheating and coking, some fluid lost even lubrication and flash fire due to overheating.
Overheating except can change the condition of the medium, but also increases its corrosion rate.Cause deformation of the metal parts, alloy surface cracking, and some coating cracks, the design should choose the balance type mechanical seal, in order to reduce the pressure to prevent overheating.