burgmann pump seal of MG13

Pump seals Description

Stationary Ring(Ceramic/SiC/TC)   
Rotary Ring(Carbon/SiC)   
Retainer(SUS304/SUS316)   
Spring(SUS304/SUS316)   
Spring Holder(SUS304/SUS316)   
Bellows(NBR/EPDM/VITON)   
O-Ring(NBR/EPDM/VITON)   

APPLICATION

Mmechanical seals are used in pumps, blowers, agitators, compressors, and other rotary shaft equipment.

FAQ On Placing An Order                            

1. Quantity:   MOQ: 5 Sets on one order, do not required same size.

2. Delivery:All of them in stock, will be shipped out same day as we received your funds.Tracking Number will be provided.(All delivered by DHL, FEDEX, UPS AND TNT ETC).

3. Payment Method:   We accept T/T;Paypal; Credit Card; Escrow; Western Union; Money Booker; Money Gram or Your Advice.

4. Price:All prices listed above, manufactuer directed price, no middle profit. Please do try one time.

We are professional various kinds of mechanical seals. such as Pump seal, Industrial pump seals, Auto Cooling pump seals, Silicon Carbide Seal Ring, Tungsten Carbide Seal Ring, Alumina Ceramic Seal Ring, O Ring, packing and gasket, etc. Manufacturer and factory in China. We can produce various kinds of mechanical seals. such as Pump seal, Industrial pump seals, Auto Cooling pump seals, Silicon Carbide Seal Ring, Tungsten Carbide Seal Ring, Alumina Ceramic Seal Ring, O Ring, packing and gasket, etc if wanted, please contact us right now!

Seal failure reason analysis

Still need to supplement the following for the sealing surface wear trace, check the wear trace, can help analysis of failure.
1. Wear wider: show that machine pump there had been a terrible wrong.
Its reason is bearing damage;Shaft vibration or shaft deformation;Shaft bending;Pump cavitation vibration;In the coupling of;The pipe serious deformation;Seal static ring tilt.
2. Mark the narrowing: grinding marks than two sealing surface minimum width narrow, this shows that overpressure sealing, pressure or temperature deformation of the sealing surface.
3. No grinding marks:
Sealing surface is not adhesive.Check whether spring compensation institution such as sliding or hampered.
4. No grinding crack but there are bright spots.
Sealing surface buckling will appear bright spot without grinding crack.Pressure is too high, gland screw is not tied to turn good or not good, or pump rough surface can form a bright spot.When two screw tied gland is used, its rigidity is not enough, the deformation is also one of the reasons that form the bright spot.
The emergence of this kind of symptom description: seal may leak a drive.